Call Sandia Customer Service for pricing and delivery... 714-901-8400
| Component ID |
Component Description |
Qty Needed |
| 80-0004-S |
Sandia Sniper Body |
1.00 |
| 10-0868 |
¼ Female Q.D. for Sniper |
1.00 |
| 10-0479 |
¼" Male Close Nipple |
1.00 |
| 10-0828 |
90 Brass Fitting for Sniper |
1.00 |
| 80-0026 |
3/8 Barb x ¼ MPT 90 |
2.00 |
| 10-0400-C |
Keeper Latch For Sniper |
1.00 |
| 10-0379 |
8-32 x 3/8" Screw |
2.00 |
| 10-0826 |
¾ Hose Clamp for Sniper |
3.00 |
| 10-0845 |
¼" Strainer for Sniper |
1.00 |
| 80-0017 |
BulkHead Fitting 500psi Sniper |
2.00 |
| 10-0831 |
S/R Bracket for Sniper |
2.00 |
| 10-0803 |
Splashproof Switch for Sniper |
3.00 |
| 10-0809 |
Sniper 3-Hole Switch Plate |
1.00 |
| 80-0052-A |
Tornado Decal for 3-100 |
1.00 |
| 10-0819 |
Control Panel Screw on Sniper |
4.00 |
| 10-0074 |
Flat Washer #8 SAE |
4.00 |
| 10-0419-A |
Screw For Sniper Hatch |
6.00 |
| 10-0804 |
Hatch Cover for Extractor |
1.00 |
| 10-0804-A |
Viking Screw Cap Gasket |
1.00 |
| 10-0806 |
Barb Hose Fitting for Sniper |
1.00 |
| 10-0805 |
Dump Valve for Extractor |
1.00 |
| 10-0821 |
Sniper Hinge |
2.00 |
| 10-0830 |
Hinge Keeper |
2.00 |
| 10-0820 |
End Cap for Rod on Sniper |
2.00 |
| 80-0012 |
Shut Off Assembly |
1.00 |
| 80-0004 |
¼x4 Brass Nipple |
1.00 |
| 80-0003-A |
Black Lined Gray Hose (sniper) |
2.05 |
| 10-0836 |
Axle 19" for Sniper |
1.00 |
| 10-0820 |
End Cap for Rod on Sniper |
2.00 |
| 10-0807 |
Wheels for Extractor |
2.00 |
| 10-0419-A |
Screw For Sniper Hatch |
4.00 |
| 10-0816 |
Caster Bolts |
8.00 |
| 10-0815 |
Caster Lock Washer for Sniper |
8.00 |
| 10-0023 |
Waist Belt Fender Washer |
2.00 |
| 10-0833 |
Motor Manifold Bolts for Snipe |
2.00 |
| 80-0116 |
Spacer for 3 Stage Sniper Motr |
3.00 |
| 10-0834 |
Pump Flat Washer |
8.00 |
| 10-0835-B |
Pump Bolt 100psi Sniper |
4.00 |
| 10-0835-N |
Nut for Pump Bolt on Sniper |
4.00 |
| 80-0024-B |
¼ MPT x 3/8 Barb |
1.00 |
| 80-0024 |
3/8 Barb x ¼ FPT for Sniper |
1.00 |
| 80-0014 |
3/8B X ¼F 90deg. |
1.00 |
| 80-0010 |
¼ Brass Tee |
1.00 |
| 80-0011 |
90deg. Street Elbow |
2.00 |
| 10-0826 |
¾ Hose Clamp for Sniper |
5.00 |
| 10-0826 |
¾ Hose Clamp for Sniper |
5.00 |
| 10-0823 |
3/8 Barb x 3/8 Male for Sniper |
2.00 |
| 10-0833-L |
Motor Manifold Bolt for Sniper |
1.00 |
| 10-1030-S3 |
Sniper Motor Gasket 3-Stage |
1.00 |
| 10-0813 |
3-Stage H.O. Sniper Motor |
1.00 |
| 10-0155 |
Hose Cuff Straight |
1.00 |
| 10-0204 |
Motor Mount Washer |
3.00 |
| 10-0851 |
Strain Relief Nut for Sniper |
1.00 |
| 10-0838 |
Pigtail for Extractor |
1.00 |
| 10-0379 |
8-32 x 3/8" Screw |
2.00 |
| 10-0400-D |
Latch For Sniper |
1.00 |
| 10-0808 |
Caster for Extractor |
2.00 |
| 10-0822 |
Exhaust Grate for Sniper |
2.00 |
| 10-0814 |
Sensor for Sniper Heater |
2.00 |
| 10-0902 |
Locking Nut for Heater |
4.00 |
| 10-1500-A |
HD Cartridge Heater 1000Watts |
2.00 |
| 10-0900 |
Heater Body Tubular |
2.00 |
| 10-0901 |
Relief Valve For Heater |
1.00 |
| 80-0101-A |
¼ Check Valve |
1.00 |
| T-A001 |
Cooling Ducting 3.5 ID |
1.00 |
| 10-0829 |
Cooling Duct Hose Clamp |
2.00 |
| 10-0860 |
25ft. Extention Cord for Snipe |
1.00 |
| 80-8005 |
¼" Hose for Sniper 25' |
1.00 |
| 10-0868 |
¼ Female Q.D. for Sniper |
1.00 |
| 10-0024-B |
1 ½" Vacuum Hose |
4.00 |
| 10-0155 |
Hose Cuff Straight |
1.00 |
| 10-0842 |
Sniper Box |
1.00 |
| 10-0870 |
¼" Male Quick Disconnect |
1.00 |
| 10-0832 |
S/R Strap Bolts |
4.00 |
| 10-0818 |
S/R Top of Tank Bolt on Sniper |
2.00 |
| 10-0846 |
¼" MPT Hex Nipple for Sniper |
1.00 |
| 10-0501 |
4" Stainless Upholstery Tool |
1.00 |
|
|
|
