Call Sandia Customer Service for pricing and delivery... 714-901-8400
| Component ID |
Component Description |
Qty Needed |
| 80-0004-6-S |
6 Gallon Sniper Body |
1.00 |
| 80-0120 |
Motor Mount for 6 Gal Sniper |
1.00 |
| 10-0804 |
Hatch Cover for Extractor |
1.00 |
| 10-0804-A |
Viking Screw Cap Gasket |
1.00 |
| 80-0055 |
Decal for Sniper 2-200 |
1.00 |
| 10-0803 |
Splashproof Switch for Sniper |
3.00 |
| 80-0013 |
500psi Switch Plate |
1.00 |
| 10-0869 |
200psi Sniper Pump |
1.00 |
| 10-0834 |
Pump Flat Washer |
44.00 |
| 10-0835-N |
Nut for Pump Bolt on Sniper |
15.00 |
| 10-0835-B |
Pump Bolt 100psi Sniper |
4.00 |
| 80-0012 |
Shut Off Assembly |
1.00 |
| 80-0024 |
3/8 Barb x ¼ FPT for Sniper |
1.00 |
| 80-0010 |
¼ Brass Tee |
1.00 |
| 80-0011 |
90deg. Street Elbow |
1.00 |
| 80-0018 |
Ball Valve for Sniper |
1.00 |
| 80-0029 |
½" Auto-Prime Clamp |
2.00 |
| 80-0026 |
3/8 Barb x ¼ MPT 90 |
2.00 |
| 80-0022 |
Screw & Nut for 500psi panel |
6.00 |
| 10-0826 |
¾ Hose Clamp for Sniper |
4.00 |
| 10-0819 |
Control Panel Screw on Sniper |
4.00 |
| 10-0074 |
Flat Washer #8 SAE |
8.00 |
| 10-0818 |
S/R Top of Tank Bolt on Sniper |
1.00 |
| 10-0818-L |
S/R Tank Bolt on Sniper Long |
1.00 |
| 10-0806 |
Barb Hose Fitting for Sniper |
1.00 |
| 10-0805 |
Dump Valve for Extractor |
1.00 |
| 10-0845 |
¼" Strainer for Sniper |
1.00 |
| 10-0477 |
Hex Pipe Nipple for Sniper |
1.00 |
| 10-0479 |
¼" Male Close Nipple |
1.00 |
| 80-0026 |
3/8 Barb x ¼ MPT 90 |
2.00 |
| 10-0868 |
¼ Female Q.D. for Sniper |
1.00 |
| 10-0843 |
3/8" Blue Hose for Sniper |
5.00 |
| 10-0822 |
Exhaust Grate for Sniper |
3.00 |
| 10-0419-A |
Screw For Sniper Hatch |
12.00 |
| 10-0851 |
Strain Relief Nut for Sniper |
1.00 |
| 10-0850 |
Strain Relief for Sniper |
1.00 |
| 10-0838 |
Pigtail for Extractor |
1.00 |
| 10-0833-6 |
Motor Mount Bolt for 6 Gal |
6.00 |
| 80-0121 |
Spacer for 6 Gal Sniper Motor |
6.00 |
| 10-1030 |
Spotter Motor Gasket |
2.00 |
| 10-0811 |
2-Stage Sniper Motor |
2.00 |
| 10-1031 |
Gasket Space for 6 Gal Sniper |
1.00 |
| 10-0017 |
Deflector Screws |
2.00 |
| 10-0820 |
End Cap for Rod on Sniper |
4.00 |
| 10-0807 |
Wheels for Extractor |
2.00 |
| 10-0832 |
S/R Strap Bolts |
2.00 |
| 10-0831 |
S/R Bracket for Sniper |
1.00 |
| 10-0835 |
Pump Bolt 200 & 500psi Sniper |
11.00 |
| 10-0815 |
Caster Lock Washer for Sniper |
8.00 |
| 10-0808 |
Caster for Extractor |
2.00 |
| 10-0821-6 |
6 Gal. Sniper Hinge |
2.00 |
| 10-0830 |
Hinge Keeper |
2.00 |
| 10-0836-6 |
Axle 16-3/8" for 6 Gal. Sniper |
1.00 |
| 10-0379 |
8-32 x 3/8" Screw |
4.00 |
| 10-0400-C |
Keeper Latch For Sniper |
1.00 |
| 10-0400-D |
Latch For Sniper |
1.00 |
| 10-0860 |
25ft. Extention Cord for Snipe |
1.00 |
| 80-0200 |
Sniper Harness |
1.00 |
| 10-0842 |
Sniper Box |
1.00 |
| 80-0017 |
BulkHead Fitting 500psi Sniper |
3.00 |
| 10-0801-I |
90 FPT for Sniper Heater |
2.00 |
| 10-0477 |
Hex Pipe Nipple for Sniper |
2.00 |
| 10-0801-D |
Brass Bushing ½" x ¼" |
2.00 |
| 10-0801-B |
Copper ADP for Heater ¾" x ½" |
2.00 |
| 10-0802 |
Strain Relief Bushing for Heat |
2.00 |
| 10-1500 |
HD Cartridge Heater for Sniper |
2.00 |
| 10-0801-C |
Brass Bushing ¾ x 3/8" |
2.00 |
| 10-0801 |
Heater Box for Sniper |
1.00 |
| 10-0801-G |
Pipe Wrap Insulation for Heate |
2.00 |
| 10-0814 |
Sensor for Sniper Heater |
2.00 |
| 10-0826 |
¾ Hose Clamp for Sniper |
4.00 |
| 10-0801-F |
Copper Tubing for Sniper Heate |
2.00 |
| 10-0801-E |
Copper Tee for Sniper Heater |
2.00 |
| 10-0803-H |
Splashproof Heater Switch |
1.00 |
| 10-0801-A |
Copper ADP for Heater ¾" |
2.00 |
